top of page
This site was designed with the
.com
website builder. Create your website today.Start Now

Petro-chemical industries

Petrochem9.jpg
Petrochem8.jpg

Analysis and instrumentation

Measuring the quality all along the process is a key for quality insurance and non-conformity cost. We are capable to provide specific continuous online measurement embed in analytic software supporting process management at different step of the production chain and keeping traceability.

Monitoring the quality of your production is the prerequisite to control, adjust, validate your production tool all along its lifetime.

  • Online analysis

    • Raw mix analyzer (Ca, Si, fe, Al, Mg, K,P,S)

    • Batch pan video analysis

    • Colorimeter, spectrometer, black and brown spots,

    • Particle size analysis

  • Centralized automatic laboratory

    • Organize the transportation of samples (Mill and/or pellet press) to be analyzed in a single location.

  • Sampling and sample transport

    • Rotating and linear sampler

    • Piston and screw and clinker sampler

  • Instrumentation

    • Level, rotation, belt off center, clogging and more…

Specific coating.

It is a 60 years of research, development and field experience that allows today to be offered with a dedicated range of solution of waterproofing and protection on concrete or steel work coating for transportation, storage, retention of liquids, powder, solid foodstuffs and gases.

Applicable for both new and rehabilitation works.

A dedicated range has been developed for industrial or public access flooring resistances matching needs of laboratories, workshops, non-slip finishes and heavy-duty coating.

  • Solvent-free epoxy and/or epoxy novolac and/or vinylester systems for the gasproofing, waterproofing and protection of concrete and steel tanks, reservoirs, temporary retentions and structures in contact with all types of chemical liquids and gases, acids, bases, however agressive..

  • Depending on the nature of the product in contact and the storage temperature, products recommended will vary to fit the constraints (multi-layer, glass-fiber-reinforced systems completed with a adapted finishing coat)

  • Resistant to all type of hydrocarbons, ethanol, applicable for oil storages (refineries, civilian and military storage depots, oil rigs...)

  • Can be combined with a honeycomb glass layer (called « 3D »), also used in leak-detection.

  • CE marking for oil storage,

  • Resistance to substrate’s cracks up to 20/10ths millimeter.

Waste water and sludge treatment

Wastewater management and its treatment is a major health and environmental issue worldwide.

Wastewater is collected and treated before being discharged into the natural environment.

Dryness or moisture content in the sludge generated by the treatment is an important factor of cost effectiveness of an installation on its evacuation and retreatment. The tendency goes to ZLD (Zero liquid Discharge) to maximize operation cost.

We can provide made to fit solution corresponding to the characteristic of your industry, thus, your effluent either complete plant or stand alone treatment from:

  • Pretreatment:

    • Screening (cable, chain, rotary screens)

    • Sand classifier

    • Screw conveyor and compactors

    • Fine screening

    • Sand washer

    • Scew wash press

  • Secondary treatment:

    • Waste conveying, compacting and washing

    • Physico chemical treatment

    • Sewer cleaning

  • Tertiary treatment:

    • Drum and Disc filters to 1à to 40 µm

    • Elimination of DCO, TSS, Phosphorus…prior either its release or recycling in the plant.

  • Quaternary treatment:

    • Purification

    • Reverse osmosis

    • sterilization

Consisting of eliminating emergent pollutants (Antibiotic, pesticides, hormones, anti-cancer…) before the effluent reaches aquatic environment causing severe damages to human health and biodiversity.

  • Sludge treatment:

    • Thickening

    • Dewatering

    • Stabilisation/hygienisation

    • Sludge transport and storage

Mixing solution

40 years of R&D and commercial development in the mixing process technologies where performances, ease of maintenance and level of hygiene are a must. The engineering service allows to propose customed made solution fitting the specificities of your process in a large range of tank volume (up to 2500m3/agitator).

Would it be stand alone agitation solution or turnkey agitated tank solution we are able to answer your concern in:

  • Pendulum agitators

  • Horizontal agitators

  • Top or bottom mount agitators

  • Dispersers

  • Knead solution.

The mixing mobile definition can be as various as single propeller with various shape, double movement, anchor impeller or ribbon mixers and made to match the constraint of your process (Viscosity, homogenization time lap, temperature control, abrasive or aggressive fluid, liquid or powder…).

Where tank can’t be opened for maintenance operation purpose a double flanged arrangement with stuff box allows complete maintenance on moto-reductor in a minimum of time.

Sampling, sample transport and loading system

Sampling and sample transport

    • Rotating and linear sampler

    • Piston and screw sampler

  • Loading system

    • Lump breaker, loading spout

Milk & dairy

bottom of page