Beverages Industries

Quality Audit

Would you be affected by issues on your water treatment or would you willing to establish a map of the current situation, highlighting points of focus, risks encountered, drawbacks of existing set-up it is always worth to welcome an experienced person that will be capable to accompany you in this journey that is dealing with water production.

Water contains life, water contains natural pollutant and unstable minerals.

The question is not “will we face a problem with this setup?”, the question is “what will we be doing when problems will arise”.

Keeping a finish product safe for the population is a daily challenge for bottlers and our 20 years expertise focused on Beverages industry can be brought to your benefits.

Water Treatment system or consulting

Whatever your personal situation, your preferred supplier list, we can support you by defining with you a strategic investment for your future, designing fully or partially you water treatment, its distribution, its CIP unit, the deepwell and raw water management integrating natural mineral water technology of RO, UF, Ozonation system indiscriminately, the technology needs to match your branding and your water needs.

We can support or act as your project manager to accomplish your evolution need with a new investment.

Our network of water treatment manufacturers can also be involved to supply you with the upmost high-end system or adhoc system matching your real need.

Water Saving : reduce/reuse/recycle in a virtuous cycle

Why saving the water?

Engaging a responsible action in regards of natural resources (city water is also a natural resource) can be motivated by:

Combination for sustainability (social, environmental, economic) and a will to promote one-self into green and eco responsible enterprise.
A will or an absolute necessity to decrease the production cost.

Water itself may not be costly but the energy required for its treatment, its internal running cost and the treatment of the effluent is far more expensive than the water itself in Asia.

A will or a need to increase productivity/capacity.

What if this volume of water could be saved and used for production?

What if a capacity increase investment could be optimized by its consumption control?

Having or willing to engage into sustainable production tool is a challenge all industries need to abide by and especially beverages industry that are highly criticize to utilize a natural resource for their production.

We can support you in developing a short and long terms strategic plan to rise your facility to the top of sustainable factories.

Step 1 : A deep understanding of your production tool and running mode ; An audit.

Step 2 : Quantitative analysis of the volume lost, why, and a qualitative analysis of these wastage to define a economically sustainable solution targeting a year or so of Return On Investment.

Waste water and sludge treatment

Wastewater management and its treatment is a major health and environmental issue worldwide.

Wastewater is collected and treated before being discharged into the natural environment.

Dryness or moisture content in the sludge generated by the treatment is an important factor of cost effectiveness of an installation on its evacuation and retreatment. The tendency goes to ZLD (Zero liquid Discharge) to maximize operation cost.

We can provide made to fit solution corresponding to the characteristic of your industry, thus, your effluent either complete plant or stand alone treatment from:

Pretreatment:
- Screening (cable, chain, rotary screens)
- Sand classifier
- Screw conveyor and compactors
- Fine screening
- Sand washer
- Scew wash press
Secondary treatment:
- Waste conveying, compacting and washing
- Physico chemical treatment
- Sewer cleaning
Tertiary treatment:
- Drum and Disc filters to 1à to 40 µm
- Elimination of DCO, TSS, Phosphorus…prior either its release or recycling in the plant.
Quaternary treatment:
- Purification
- Reverse osmosis
- sterilization

Consisting of eliminating emergent pollutants (Antibiotic, pesticides, hormones, anti-cancer…) before the effluent reaches aquatic environment causing severe damages to human health and biodiversity.

Sludge treatment:
- Thickening
- Dewatering
- Stabilisation/hygienisation
- Sludge transport and storage

Specific coating.

It is a 60 years of research, development and field experience that allows today to be offered with a dedicated range of solution of waterproofing and protection on concrete or steel work coating for transportation, storage, retention of liquids, powder, solid foodstuffs and gases.

Applicable for both new and rehabilitation works.

A dedicated range has been developed for industrial or public access flooring resistances matching needs of laboratories, workshops, non-slip finishes and heavy-duty coating.

A solvent-free epoxy coating, with or without glass fabric reinforcements.

For permanent contact with all types of foodstuffs, whether liquid, semi-solid or solid.
Designed for use in the storage, processing and transformation of foodstuffs.
Can be used in silo while allowing the vertical movements of the content to be fluid eliminating the risk of the wall surfaces to torn off.
Simple and quick to sanitize and clean thanks to their smooth and homogeneous finishing.
Create a barrier with substrate and the product stored on which bacteria will not appear and proliferate.
Chemically neutral, no Bisphenol A, phtalate or epichlorohydrin migration.
Comply with all sanitary and toxicological regulations in force.
Resistance to substrate’s cracks up to 20/10ths millimeter.

Mixing solution

40 years of R&D and commercial development in the mixing process technologies where performances, ease of maintenance and level of hygiene are a must. The engineering service allows to propose customed made solution fitting the specificities of your process in a large range of tank volume (up to 2500m3/agitator).

Would it be stand alone agitation solution or turnkey agitated tank solution we are able to answer your concern in:

Pendulum agitators
Horizontal agitators
Top or bottom mount agitators
Dispersers
Knead solution.

The mixing mobile definition can be as various as single propeller with various shape, double movement, anchor impeller or ribbon mixers and made to match the constraint of your process (Viscosity, homogenization time lap, temperature control, abrasive or aggressive fluid, liquid or powder…).

Where tank can’t be opened for maintenance operation purpose a double flanged arrangement with stuff box allows complete maintenance on moto-reductor in a minimum of time.

Milk & dairy